1. Introduction:
1.1) Raw material: all kinds of biomass material, such as pasture, sawdust, eucalyptus bark, bran, straw, rice straw, wheat straw, corn stalk, peanut shell, beanstalk, cotton husk, shrub, forest product residual wastes and other wood materials.
1.2) Application:
Biomass power station, small boilers, hot water boiler, industrial boiler, gas furnace, and so on.
1.3) Working principle of briquette machine: strong impact force 300t, high-frequency impact times 300 times/m, generates 150-200 degrees to forming.
1.4) Product features:
1. Low cost, high added value, ash contains Mg, K, Na inorganic fertilizer;
2. High density, easy to store, density 1-1.5g/cm3, cover small area, convenient to transport and store;
3. Clean and Environed, green power, contains S 0.16-0.22%, is one kind of safety and clean energy.
The machine is widely applied in mechanism for refractory, power plant, metallurgy, chemical industry, energy, transportation and supplying heating industries.
Technology:
The technology of coal briquette molding divide cold press molding and hot press molding, the former is main. The cold press molding divide with binder and no binder, the former is main
Advantages:
a. saving energy and protecting environment
b. easy to transport
c. improving the use ratio
d. High economy benefit and social benefit
| Technical Parameters |
| Including |
(1) Screw conveyor (2) Main press machine |
| (3) Control cabinet (4) Oil cooling equipment |
| (5) output line (6)belt conveyor |
| Capacity |
>1 T/H |
| Industrial Voltage |
380V 50Hz |
| Power |
60kw |
| Size of raw material |
<20mm |
| Moisture of material: |
<15% |
| Size of final briquettes |
Diameter:70mm |
| Density of briquettes |
1-1.4 g/cm3(according to different raw material) |
| Moisture of briquettes |
<10% |
| Overall dimension |
L3500*W1800*H2300 mm per set |
| Total weight |
7200KG |
| Workers needed |
3 workers |
| Power consumption |
50 KWH/ton |
| Floor space |
50 m2 |
Use and characteristics
1. This product has reasonable design, reliable quality, simple structure, convenient operation, small size, small footprint, labor saving and power saving.
2, the design of fully automatic control electric heating device, can randomly adjust the dry humidity of the material, to ensure stable discharge molding, improve work efficiency.
3. The main part of the product is treated with special wear-resistant materials, so it can be continuously pressed and produced.
4. It is suitable for press forming of various biomass raw materials, with low energy consumption and high production efficiency.
5. The three bearings of the old-fashioned movement are four, which increases the stability and durability of the machine.
6, the old-fashioned oil-based lubrication for oil-immersed lubrication, as long as there is no shortage of oil, can be used for many years.
7. Increase the pitch to increase the feed amount, thus greatly increasing the output.
8. The structure of the forming cylinder is improved, the friction between the machine and the raw material is reduced, and the density of the mandrel is increased.
Use and maintenance:
1. Check whether each rotating part is flexible before starting each shift, whether there is abnormal noise, and the empty machine can run for 2~3 minutes.
2, the raw materials must be treated, the maximum particle size is less than 3mm, add water, add binder, curing agent, can be used after stirring for 24 hours.
3, the discharge of the material is blocked, with wooden strips or bamboo strips, do not use metal rods.
4. The bearing of the machine rotating part should be injected with lubricating oil regularly, and the temperature of the bearing part should not exceed 60 degrees.
5. Stop the feeding before stopping, wait until the material in the cylinder is empty, stop the machine, disassemble the machine head, reinstall it after cleaning, in case of getting off work.
6. In order to prevent the motor from running out of overload, it is recommended that the user install a current and voltage meter to adjust the amount of material and water content according to the ammeter.
OUR SERVIC
Pre-sale service
1.Our professional and experienced engineer team helps every client to find his most suitable equipment or chose of plant.
2. Any kind of legal logo printing or design are available.
3.Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.
After you choose:
1. We will make drawing and show you how the pant looks.
2. Every equipment will be checked carefully before packing. Video on machine testing is available.
3. Email you the tracking no., and help to chase the container until it arrives you.
After-sale service
1.We are very glad that customers give us some suggestion for price and products.
2.If you have any question,please contact us freely by E-mail or Telephone.
FAQ
Q. what is your payment term?
A: T/T 30% down payment, balance to be paid before shipment.
Q: what is your main market?
A: South America, Eastern Europe, Southeast Asia, Africa, Oceania, Eastern Asia
Q: what is your producing time?
A: Producing time depends on that machines you ordered. Usually takes 45 days.
Q: what documents you can offer?
A: We can offer invoice, packing list, contract, instructions, customs declaration, certificate of origin, CE. If client need other documents, specifications, please confirm with service staff.
Q: If equipments have some quality problem, how would you deal with?
A: We will responsible for all the quality problems. We will check the machine to get the problem. If need parts, will send them to you.
Q: how to install the equipments?
A: We send 1-2 engineer (100usd/person/day) to the local plant for helping install and commissioning equipments. To save time, our service stuff will tell you what to prepare in advance. We can also teach the workers to how to use the machines and how to make the products better.
vangton.en.made-in-china.com
www.vangton.ru
Audited Supplier 
){kind=link}
){kind=link}